SuppliesBy Taxidermy Hobbyist Editorial TeamUpdated November 22, 2026

Taxidermy Display Cases, Domes and Shadow Boxes

A taxidermy display case is any enclosure that keeps dust, bugs and hands off a mount: a glass cabinet, a glass dome over a base, an acrylic cover or a shallow shadow box on the wall. Small birds, skulls, insects and keepsake parts go under a dome or into a box. Larger work goes into a floor case. Van Dyke's lists a glass pedestal case at $527 and barn wood shadow boxes from $75 (checked 2026-11-22).

A case won't fix a mount that's already shedding or full of bugs, and it can hurt one if it sits in a hot spotlight. Pick the type that fits the piece, then put it where light and humidity stay steady.

Some of the product links below are affiliate links. Taxidermy Hobbyist may earn a commission on qualifying purchases at no extra cost to you. See our affiliate disclosure.

Why put a mount in a case at all?

Because dust is the slow killer of fur and feathers, and every cleaning costs some hair. The Canadian Conservation Institute (CCI) describes dust as abrasive, a food source for insects and mould, and hard to get out of fur or fine feather structure. It also notes that hair keeps falling out of many mounted specimens over time and that handling and dusting make the loss worse, which is why it puts so much weight on keeping dust off in the first place (CCI, care of mounted specimens and pelts).

The CCI note says a specimen kept in the open, outside a case, needs dusting at least twice a year, and that every mount should be checked for insect damage every three months. The larvae of clothes moths and carpet beetles can wreck fur and feathers in days.

The UK's Institute of Conservation (Icon) gives the same advice in short form: keep taxidermy in closed cupboards to cut down on dust and on the chance of pests. For insect collections it adds that tightly sealed drawers keep most crawling pests out (Icon, zoological specimens). A display case is the home version of that cupboard, with a window in it.

For the cleaning side, see how to clean taxidermy. If you've already found frass or shed larval skins under a mount, read the dangers of insect infestation before you seal anything in a case: a case holds pests in as well as out.

What kinds of taxidermy display cases are there?

Four, for most homes: a full glass case or cabinet, a glass dome on a base, an acrylic cover on a base, and a wall shadow box. They differ mainly in what size of mount they suit and how much protection they give from the sides and front.

TypeBest forProtectionTrade-offs
Glass case or pedestal cabinetBirds, small mammals, several small pieces on shelvesClosed on all sides; a door for accessHeavy; large ones ship by truck; UV protection depends on the glazing
Glass dome (cloche) on a baseA single small bird, skull, insect or keepsakeClosed, round, easy to lift offLimited sizes; the mount has to fit inside the curve
Acrylic cover on a baseBirds, fish, small mammals, European skullsClosed on all sidesUV blocking depends on the acrylic grade (see below)
Shadow boxFlat or shallow pieces: tusks, turkey beards, tail fans, ducks in a wall boxFront glass or open front, hangs on the wallShallow; not for anything deep

What does a glass display case cost?

Van Dyke's lists one glass case in its Display Cases section: a Glass Pedestal Display Case in finished oak at $527.00 (Van Dyke's B7122F, checked 2026-11-22). Its listing gives these details:

  • 40 inches tall with a 12 inch square top.
  • A mirrored back, glass on the other three sides and a hinged glass door in front.
  • Two glass shelves that come out, so it can hold one tall piece or several small ones.
  • It has to ship by truck, and it's stocked only in the company's North Carolina warehouse.

The same section lists two solid oak bases: 23 3/4 by 13 1/2 inches at $86.00 and 23 3/4 by 17 inches at $89.00 (Van Dyke's Display Cases, checked 2026-11-22). The smaller one's product page gives an inside size of 22 by 12 inches, and Van Dyke's suggests building habitat on it with the mount (Van Dyke's B7179). If you go that route, our taxidermy driftwood and habitat supplies guide covers rocks, branches and groundwork.

For a larger cabinet, a local cabinet or glass shop can build to size. Get the mount's dimensions first (see sizing below) and ask whether the glass or acrylic they quote is a UV-filtering grade.

Is a glass dome right for your mount?

Yes, if the piece is small and compact: a songbird-sized mount, a single skull, a mineral-and-insect arrangement or a pet keepsake. A dome suits one piece on a shelf. For the history of cased birds and domes, see Victorian taxidermy.

The limits are size and shape. A dome is narrowest at the top, so a bird with raised wings or a long tail may not clear it. Measure the widest point of the mount at the height where it'll sit, not just at the base. You'll want a little air between the specimen and the glass all the way around, so nothing presses against the feathers or fur.

The Van Dyke's Display Cases section lists no domes; home decor and craft sellers carry them. Amazon lists many sizes of glass cloche domes with wood bases. Check the inside height and inside diameter in the listing, not the outside size, and look for a base with a groove the dome sits in so it can't slide off.

For pinned insects, a glass-topped box is usually a better fit than a dome. Our insect pinning kit guide covers the boards and boxes.

Glass or acrylic: which blocks more UV?

Neither one blocks all of it, and the grade matters more than the material. Fading is the reason to care: the CCI note says fur and feathers discolor under both visible and ultraviolet light, dark colors fading and light ones yellowing, and that the change can't be undone. Icon says the same about pigment in taxidermy exposed to daylight and artificial light.

One acrylic case seller, Better Display Cases, is candid about it. It says no clear UV acrylic gives 100% protection at any thickness, that "museum grade" OP-3 acrylic protects better but costs much more and looks slightly dimmer, and that its own standard cases are meant for indoor use under normal room light (Better Display Cases, UV protection). On the sheet side, Plaskolite says its OPTIX Frame Grade UVF acrylic absorbs 98% of damaging UV (Plaskolite, museum applications). That's the maker's figure, and it's for the sheet, not a finished case.

What that means for you: a UV-filtering acrylic case helps, a plain glass or plain acrylic case helps less, and none of them makes a sunny window spot safe. Amazon sells acrylic display cases with wood bases in many sizes. If a listing claims a UV percentage, check that it names the acrylic grade.

What goes in a taxidermy shadow box?

Anything flat or shallow that you'd rather hang than set on a shelf. The boxes and panels sold for taxidermy are built for turkey beards, pheasant tails and a small duck, and a pair of tusks fits as well. In a hunting forum thread about what to do with a warthog, one member said he pulled the tusks from his first one and put them in a shadow box, while his son's boar was going to a shoulder mount (AfricaHunting member CAustin, 2016).

Van Dyke's lists a line of McKenzie artificial barn wood boxes and panels made for taxidermy (Van Dyke's barn wood shadow boxes, checked 2026-11-22):

ItemListed priceSize (inches)
Barn Wood Shadow Box$75.0024 by 13 3/4 by 3 1/2
Barn Wood Shadow Box$94.5030 by 17 3/4 by 3 1/2
Barn Wood Shadow Box$158.0038 by 30 1/2 by 4 1/2
Wood Duck Box$91.0022 3/8 by 11 1/4 by 13 1/2
Pheasant Tail Barnwood Panel$64.0026 by 12 by 1 1/8
Turkey Beard Holder (accessory)$29.50not listed

Note the depth: 3 1/2 inches is plenty for tusks or a beard, but not for a bird body. For a turkey fan and beard, see our turkey fan mount guide.

For a glass-front box sized to a photo frame, general craft listings work too. Amazon has deep shadow box frames; check the inside depth before you buy. Small parts can be set with a dab of taxidermy clay or a pin so they don't slide when the box hangs.

Where should a cased mount sit?

Out of direct sun, away from heat, and somewhere the humidity doesn't swing. A case slows dust and bugs; it doesn't fix a bad spot. The CCI note gives these museum targets:

  • Humidity: 45% to 55% relative humidity. Above 65%, mould becomes a risk; very dry air can crack and embrittle a mount; fast swings stress the different materials in it.
  • Temperature: preferably not above 25 C (77 F), though steady humidity matters more.
  • Light: ideally no more than 50 lux on fur and feathers, with UV held to 75 microwatts per lumen or less, and the hours of display rationed.
  • Heat from lights: a bright spotlight can heat the air inside a tightly closed case and the surface of the specimen.

Icon adds one thing worth knowing if you light a case: bright showcase lights switched on and off every day are a common cause of fast humidity swings, and swings that are fast or large enough can split bone. Low-heat lighting on for short periods is the safer choice.

Most homes can't hold museum numbers, and you don't need a meter to do better. Pick an inside wall, keep the case off radiators and out of window light, and don't park it in a damp basement. Our guide to storing and moving taxidermy covers attics, basements and moves. For wall pieces, see how to hang a mount.

How do you size a case for your mount?

Measure the mount, not its base. Take three numbers with a tape: the widest point side to side (wingtips, ears, tail), the deepest point front to back, and the height from the bottom of the base to the highest point. Then:

  1. Compare those numbers with the case's inside dimensions. Sellers often lead with the outside size.
  2. Leave clearance on every side so no feather, ear tip or antler touches the glass.
  3. Check the base: does the mount's own base fit on the case floor, or will it be fastened to the case base?
  4. For a wall shadow box, add the weight of the piece to the box and hang it on a stud or rated anchor.

You'll also need a few taxidermy hand tools to fix a mount to a case base: a drill, screws sized to the base, and a way to sink them from below.

Taxidermy display case FAQ

Do old cased mounts need special handling?

Treat them with care. The CCI note warns that some older mounted specimens were treated with arsenic, mercury compounds or pesticides such as DDT, and Icon says taxidermy made before 1980 may carry arsenical soap, sometimes visible as a fine white powder. Wear disposable nitrile gloves to handle them. If you clean one, Icon advises a dust mask and dust extraction; otherwise ask a conservator.

Will a case stop bugs?

It helps by cutting down the chance of pests, but it won't kill an infestation already inside. Inspect the mount before it goes in, and keep checking. The CCI note suggests every three months.

Can you put a shoulder mount in a case?

Not in a stock one. The only glass case in the Van Dyke's Display Cases section is a pedestal cabinet with a 12 inch square top, built for small pieces, so a wall-hung shoulder mount would need a custom build. If yours stays open, dust it gently; see trophy care.

Who builds custom taxidermy cases?

Ask a studio in our taxidermist directory whether it builds or sources cases, or ask a local glass or cabinet shop with the mount's measurements in hand. For the main supply catalog, see our Van Dyke's review, and for everything else a mount needs, taxidermy supplies.

Need a Professional?

Browse taxidermy studios, schools, suppliers and tanneries by state.

Find a Taxidermist Near You