SuppliesBy Taxidermy Hobbyist Editorial TeamUpdated November 22, 2026

Bug Pinning Kit Guide: Insect and Butterfly Pinning for Beginners

A bug pinning kit comes down to a few basics: stainless steel insect pins, a spreading board for wings, fine forceps, and an airtight container to relax dried insects before you pin them. Bought separately from science suppliers, these come to under $50; a ready-made insect pinning kit is the other route. Either way, the pins and the board matter most.

Pinning is one of the few corners of taxidermy with no skinning and no chemicals. Two popular beginner videos start the same way, by laying out the tools before touching an insect (Jacobs Trading, How to Pin A Butterfly; Ocean County Library, Intro. to Insect Pinning). This guide is that tool list, with prices.

Some of the product links below are affiliate links. Taxidermy Hobbyist may earn a commission on qualifying purchases at no extra cost to you. See our affiliate disclosure.

What should a bug pinning kit include?

A complete bug pinning kit includes insect pins, a spreading board, forceps for handling wings and legs, a pair of fine scissors, and a relaxing chamber for dried insects. A display case or frame is the last piece. Most ready-made kits bundle some of these; check which ones are missing before you buy.

ItemExampleListed priceSeller
Insect pinsSize 3 stainless steel, 38 mm (1.5 in), pack of 100$7.50Indigo Instruments
Spreading board11.5 x 4 in, firm-density polystyrene$5.95Home Science Tools
Tool kitEntomologist Tool Kit, 6 pieces: 2 scissors, 4 forceps$28.95Indigo Instruments
Pinning forcepsInsect Pinning Forceps (also in the tool kit)$5.75Indigo Instruments
Wing forcepsButterfly Spade Forceps (also in the tool kit)$5.75Indigo Instruments
Relaxing chamberAny airtight container with damp paper towelsHousehold itemSee the relaxing steps below

Prices checked November 21, 2026. Pins, a spreading board and the Entomologist Tool Kit, which already includes spade and pinning forceps, come to $42.40 before shipping. The tool kit was listed as out of stock on November 22, 2026; pins, the board and the two forceps bought on their own come to $24.95, without scissors.

Which insect pins should you buy?

Buy stainless steel entomology pins, not sewing pins. Entomology pins come in numbered sizes; at Indigo Instruments a size 3 stainless pin is 38 mm long and a pack of 100 lists at $7.50. Check your guide or supplier for the size that fits your insect.

Indigo Instruments lists its size 3 stainless steel insect pins at 38 mm (1.5 inches) long, $7.50 per 100 (Indigo Instruments). Amazon also sells stainless steel insect pins.

Do you need a spreading board for butterflies?

Yes, for butterflies, moths and anything you want displayed with open wings. The board has a groove for the body and flat sides where the wings are pinned into position and left to dry. A basic polystyrene board costs a few dollars. Insects displayed with wings closed skip the spreading step.

The Home Science Tools board measures 11.5 by 4 inches, is made of firm-density polystyrene, and lists at $5.95 (Home Science Tools). The Jacobs Trading butterfly video shows the job the board does: after the pin goes through the body, the wings are spread and pinned into position, and the insect dries before the positioning pins come out (How to Pin A Butterfly). Amazon also lists butterfly spreading boards.

How do you relax a dried butterfly before pinning?

Put it in a relaxing chamber: an airtight container lined with damp paper towels. Leave it overnight so the wings and legs soften enough to move without breaking. Most butterflies and moths can stay a few days, but take delicate species out after about one day.

Those steps come from Bic Bugs, a butterfly and insect supplier, in its rehydrating video (How To Rehydrate Butterflies and Moths):

  1. Line an airtight container with damp paper towels, either over a very shallow layer of water or spritzed.
  2. Inject the insect's body with water from a needle syringe until a little drips off.
  3. Rest the insect with its body on the damp towels and its wings against the side of the container.
  4. Leave it overnight. Most butterflies and moths can stay a few days; take delicate species out after one day.

Leaving a delicate species in too long is the mistake the video's description warns about.

How do you pin an insect, step by step?

Relax the insect if it's dry, push one pin straight through the body, set it on the spreading board, spread and pin the wings and legs into position, and let it dry. Then remove the positioning pins, repair any damage with glue, and move it to a display case or frame. Our insect pinning guide shows where the pin goes on beetles, bugs, flies and butterflies.

Between them, the Ocean County Library workshop and the Jacobs Trading demonstration cover these steps:

  1. Gather the tools first.
  2. Pin through the body.
  3. Spread and pin the wings into position and adjust the legs.
  4. Let the specimen dry, then remove the positioning pins (Ocean County Library).
  5. Repair damage with glue.
  6. Frame or display the finished piece (Jacobs Trading).

For species notes and display ideas beyond the basic kit, see our guides to butterfly taxidermy and beetle taxidermy.

Ready-made insect pinning kit or build your own?

Pins, a board and the tool kit from the first table come to $42.40 at Indigo Instruments and Home Science Tools prices. A ready-made insect pinning kit saves the shopping and suits a gift or a classroom. Compare the contents list to the table above: a kit without a spreading board or enough pins isn't complete.

If you'd prefer a single box, Amazon sellers also list insect pinning kits. Make sure the pins are stainless steel and that a spreading board is included.

Do you need a display case or frame?

A display case or frame is the last part of an insect kit. Pinned insects are fragile, so they belong behind glass once they are dry. Our display case guide compares glass cases, domes, acrylic covers and shadow boxes. Both beginner videos include a display step.

The Jacobs Trading video is built around that finished frame, from its title, "Make Your Own Real Butterfly Art," to its last step (Jacobs Trading), and the Ocean County Library workshop has a chapter on making a display (Ocean County Library). Shadow box frames and insect display cases are sold for this.

How do you protect a finished insect collection?

Keep finished insects in a closed case or frame, away from damp, and check them for pests now and then. A sealed display is part of the kit, not an extra.

Our guide to the pest damage that can hit mounts and collections explains what to look for. Collecting rules differ by place, so check the rules for anywhere you collect before you take insects from it.

Bug pinning kit FAQ

What is the difference between a bug pinning kit and an insect taxidermy kit?

They are usually the same thing: pins, a spreading board and tools for preserving insects by drying rather than skinning. Sellers use the names loosely, so compare the contents list rather than the name.

Do you need special forceps?

Fine forceps let you move legs and wing edges without handling them. Indigo Instruments sells both Insect Pinning Forceps and Butterfly Spade Forceps at $5.75 each, and its Entomologist Tool Kit includes four forceps with two pairs of scissors.

Can kids use a bug pinning kit?

Pins and forceps are sharp, so younger children need an adult handling the pins. The Ocean County Library introduction linked above comes from a public library, which makes it a good starting video for a family.

What should I try after insects?

Compare every taxidermy kit for a first mammal or fan project, read our guide to beginner taxidermy, or look at a European skull mount kit for a no-skin project with bone instead of wings.

Need a Professional?

Browse taxidermy studios, schools, suppliers and tanneries by state.

Find a Taxidermist Near You