A hide tanning kit turns a fleshed, salted skin into leather that stays soft and will not rot. Pick the kit by what the hide is for: a dry tan for a rug or wall hanger, a wet tan for a cape that goes on a form. At Van Dyke's, boxed kits run from $26.50 for the McKenzie Tan kit to $170.00 for a large Lutan FN kit (checked November 21, 2026).
The usual first question is the one a Hunt Talk member asked in 2025: "I'd like to try doing my own and am looking for suggestions on what to do and chemicals you's use" (Hunt Talk, 2025). An experienced trapper in that thread was honest about the answer: it's a lot of work, his own hides were never quite right, and he now sends his hides out to be tanned (Hunt Talk, 2025). For practice skins and a first rug, a kit is a low-cost way to learn.
Some of the product links below are affiliate links. Taxidermy Hobbyist may earn a commission on qualifying purchases at no extra cost to you. See our affiliate disclosure.
Which hide tanning kit should you buy?
Match the kit to the hide and the finish. Hair-on kits keep the fur for a rug or wall hanger; hair-off kits make leather; reptile kits are for snake and lizard skins; and the large sizes are for bigger jobs. For a first try, a small hair-on kit and a squirrel, rabbit or fox pelt keeps the stakes low.
| Kit | Size or type | Listed price | Seller |
|---|---|---|---|
| McKenzie Tan Tanning Kit | Boxed kit for wet-tanning capes for mounting (listing) | $26.50 | Van Dyke's tanning kits |
| McKenzie Tanning Kit with DVD | Boxed kit plus instructional DVD | $41.50 | |
| Potassium Alum Tanning Kit | Alum tan | $29.00 | |
| Curatan Kit | Hair on / hair off | $35.00 / $37.50 | |
| Tan'um Kit | Hair on / hair off | $55.00 / $59.50 | |
| Tan'um Kit 100 | Large size | $94.50 | |
| LUTAN FN Kit | 1 lb / 2 lb / 4 lb | $41.00 / $65.00 / $80.50 | |
| LUTAN FN Kit 100 | Large size | $170.00 | |
| WASCO Tru-Tan Reptile Tan 2 lb Kit / Wasco Reptile Tanning Kit | Snake and reptile skins | $50.50 / $45.50 | |
| Liqua Tan Tanning Kit | Packaged by Knoblochs for the beginner | $37.95 | Matuska |
| Lutan-F | By size | $39.95 to $72.95 | Matuska |
| Tanning Kit for Wallhanger (TruBond 1000B) | Wall hanger kit | $60.95 | Matuska |
| TruBond 1000 | By size | $30.50 to $89.95 | Matuska |
All prices checked November 21, 2026. Van Dyke's also lists a De-Hairing Kit at $21.50 for taking the hair off before a leather tan. Matuska describes its Liqua Tan kit as packaged by Knoblochs for the beginner and lists citric acid crystals among the contents.
On Amazon, boxed options include the Tan-a-Fur Skin Kit, the Tan-a-Hide Kit and the brush-on NuTan tanning solution, which its maker demonstrates on a mule deer hide start to finish (Advanced Tanning Solutions). Search deer hide tanning kits to compare others.
Wet tan or dry tan: which do you need?
Use a dry tan for anything that will be a rug, throw or wall hanger, and a wet tan for a cape that will be mounted on a form. A dry-tanned cape can be rehydrated for mounting, but a tanner warns it stops stretching and comes out smaller on the form. Decide before you buy, because the finishing steps differ.
- For rugs and wall hangers: a dry tan suits rugs and throws (AfricaHunting, 2023). Amy's Taxidermy dries the tanned skin, then repeatedly stretches and breaks it, for example across the edge of a board, and tumbles it to finish softening (Amy's Taxidermy tanning tutorial).
- For mounts: the same tutorial folds a wet-tanned skin, lets it sit overnight, bags it and freezes it until mounting day. Prado's Trading Post explains why: a fully dried and softened cape stops stretching and comes out smaller on the form (Prado's Trading Post).
- For a customer's eye: one taxidermist told a forum asker that a customer will see no difference between wet and dry tans on a finished mount; a dry tan just has to be rehydrated first (HuntingNet, 2011).
If the cape is headed for a deer head mount, our guide to shoulder mount supplies covers the rest of that job.
What do you need before you open a tanning kit?
A kit only tans; the fleshing and salting come first, and they decide most of the result. You need a fleshing tool or beam for removing meat, fat and membrane, plenty of fine salt, a place to drain and dry the salted hide, and pH test strips if your kit uses a pickle.
- Fleshing tools. A cheap dull knife works on small thin pelts, but beaver, coyote, deer and bear need a quality sharp fleshing knife (Rokslide, 2024). One member wrote that "For big stuff like deer and above nothing beats a 3000 psi power washer with a rotary tip" (Rokslide, 2024). Van Dyke's own fleshing beams list at $48.00 to $61.00, a serrated mammal fleshing tool at $21.50 and a fleshing cone at $27.50 (Van Dyke's).
- Salt. Amy's Taxidermy uses fine salt that looks like table salt and says coarse rock salt dissolves poorly and clouds the pickle; in the 2023 video she puts fine stock salt at about $7 for a 50 lb bag. A Rokslide member's advice for a pelt bound for tanning is fine non-iodized salt, with the skin folded skin to skin (Rokslide, 2020); Amy says in her video that iodized or not doesn't matter.
- Somewhere to drain and dry. Once the salt is soaked through it stops working: shake it off, apply fresh salt, and set the hide on an incline so fluid drains (HuntingNet, 2005). Then drape it over a rail in the shade; left flat outdoors it stays damp (HuntingNet, 2005). Drying hard can take about two weeks in a humid climate (HuntingNet, 2005).
- pH strips. If your kit uses an acid pickle, test it with pH strips that read 0 to 3; Amy's Taxidermy warns that pool strips do not read the low range a pickle needs.
Above all, flesh thoroughly. A Rokslide member's advice to a first-timer was to spend time fleshing and then spend more (Rokslide, 2021), and on fatty animals like badger, all the fat and tissue must come off, without scraping so deep that the guard hairs pull through (Rokslide, 2020).
How does a kit tan work, step by step?
Most pickle-and-tan kits follow the same order: flesh, salt and dry, rehydrate and wash, pickle, shave, pickle again, neutralize, apply the tan, then either freeze it wet for mounting or dry and break it for a rug. Follow your kit maker's rates and times; the figures below are one taxidermist's, not universal. Our guide on how to tan a hide explains each stage.
Amy's Taxidermy's complete tanning tutorial gives this sequence (Amy's Taxidermy):
- Salt the fleshed and turned skin, let it drain, then salt it a second time. Salting first pulls out blood and moisture, so the pickle stays cleaner.
- Rehydrate dried skins in a salt water bath, checking often so they do not sit longer than needed.
- Pickle. She mixes about one pound of salt per gallon of water with the pickling acid at the maker's rate, tests with strips that read 0 to 3, and aims for about 1.5, checking again over the following hours because the skins push the pH up.
- Shave the flesh side thin and even after about three days in the pickle, then return the skin to the pickle for at least another day. McKenzie's shaving video explains why: a thin, even skin shrinks less and holds detail on the form (McKenzie Taxidermy Supply).
- Neutralize in water with about one tablespoon of baking soda per gallon for 20 to 30 minutes, longer for thick skins, so the tan can bond.
- Tan. Hang the skin until it is damp but able to absorb, then brush the tan onto the flesh side, working it into the lips, eyelids and legs.
- Finish wet (fold, bag and freeze for mounting) or dry (dry, stretch and break for a rug or wall hanger).
Her warnings are worth knowing before you start: guessing the pickle pH instead of testing it, washing skins with dish soap or shampoo (which she says upsets the hide's pH), going from pickle to tan without neutralizing, and missing spots with the tan around the lips and eyelids. She salts every hide first, though she says salting isn't strictly needed in most cases; she finds it means using less pickling acid.
What is the cheapest way to tan a hide at home?
One low-cost method shown on video is an alum and salt soak: hides go into a bucket of water with alum and pickling salt, weighted under with a brick. A boxed alum kit costs $29.00 at Van Dyke's. It takes the same fleshing and breaking work as any other tan.
The alum method comes from Urban Hunterz's easy, cheap alum tanning video (Urban Hunterz); the Potassium Alum Tanning Kit price is from the Van Dyke's tanning kits page. The Rural Millennial and The Huntsman each show a deer hide start to finish with other boxed products (The Rural Millennial; The Huntsman), and both show breaking the hide as it dries, which is what makes it soft instead of stiff. The "wet tan for mounts" caution above still applies.
Is home tanning cheaper than a tannery?
For a cape, a boxed kit from $26.50 is the low-cost route: the McKenzie Tan kit's listing says it holds enough to tan two average size whitetail capes (Van Dyke's). The trapper quoted above now sends his hides out to be tanned, because his own were never quite right. A forum member reports that American tanneries charge by the square foot, so the bill grows with the hide.
In 2026 one member posted a quote from Trophy Solutions of about $510 to tan a blue wildebeest flat skin and $350 for a nyala, and called it close to outrageous (AfricaHunting, 2026). Another member replied that American tanneries charge by the square foot, and that his own price to tan a blue wildebeest flat skin through his American taxidermist was around $600 (AfricaHunting, 2026). Those are large African skins, but the same per-square-foot logic applies to any big hide. The kits in the table above start at $26.50.
Hide tanning kit FAQ
What is the best tanning kit for a deer hide?
Size matters more than brand: pick a kit size sold for a deer-sized hide, or a larger "Kit 100" size, and decide hair-on or hair-off first. The deer hide videos linked above use NuTan and other boxed tans.
Can you tan a hide without a kit?
Yes. The alum and pickling salt method uses bulk chemicals instead of a boxed kit, though the fleshing, salting and breaking steps are the same.
How long does tanning a hide take?
Plan on more than a week. In the Amy's Taxidermy method, the pickle alone takes about three days before shaving and another day after. Before that, a Florida taxidermist found a salted hide can take about two weeks to dry hard in a humid climate (HuntingNet, 2005).
What should I try after a tanned pelt?
Compare the taxidermy kits for beginners, try a no-skin project like a deer skull mount kit or an insect pinning kit, or read our full guide to taxidermy for beginners. For brand detail, see our review of McKenzie supplies.