If you want to bleach a deer skull, what you really want is to whiten it, and the University of Arizona's skull guide does that with hydrogen peroxide, not household chlorine bleach. This guide explains why chlorine bleach ruins bone, which peroxide strength to buy, how to soak or paste a skull white, how long it takes, what it costs and how to stay safe while you do it.
Safety first with peroxide.
- Eyes and skin: the University of Arizona's skull guide warns that hydrogen peroxide "can cause serious damage if it comes in contact with your eyes"; if it does, "flush the eyes with plenty of water and contact a physician immediately." It says rubber or latex gloves should be worn (University of Arizona AZ1144). Norway's civil protection directorate adds protective goggles (DSB).
- Metals: NIOSH lists hydrogen peroxide as "a powerful oxidizer" that is incompatible with iron, copper, brass, bronze, chromium, zinc, lead, silver and manganese (NIOSH Pocket Guide). Use a plastic or glass container: OddArticulations' owner says peroxide "can and will rust many metals" and that "Any plastic or glass will be fine" (OddArticulations, Whitening 101).
- Acetone: never let acetone and peroxide meet. OddArticulations says acetone "reacts very violently with peroxide," that bones degreased in acetone must dry completely before whitening, and that acetone cannot be poured down the drain (OddArticulations, Degreasing 101).
Can you bleach a deer skull with household bleach?
No. Household chlorine bleach damages bone, and the damage keeps going. The University of Arizona's skull guide says chlorine bleaches "should not be used because they can dissolve bone tissue." When someone asks how to bleach a deer skull, the answer is hydrogen peroxide, but even peroxide can weaken bone if a skull soaks too long or is not rinsed.
The bone-cleaning site OddArticulations is blunter: "Chlorine Bleach eats bone. It is not stoppable, and is not reversible." It says a bleached skull keeps deteriorating until it crumbles or flakes, sometimes in days and sometimes over decades, and that the signs are tiny flakes coming off when handled, fragile thin sections and a porous surface (OddArticulations, Whitening 101). Alaska's Department of Fish and Game also warns against it in its skull cleaning steps: "Don't use liquid bleach, it is harsher to the bone" (ADFG).
Part of the mix-up is about words. When a forum member asked in 2025 how long to let bleach sit on a skull, one reply was simply: "You don't use bleach to be clear, you use peroxide" (forum post, 2025). Even video titles say "bleach" when they mean peroxide, such as dirteReviews' How-to bleach a skull w/ hydrogen peroxide and preserve it (2011) and MtL Outdoors' How to Bleach a Deer Skull (CHEAP & EASY) (2019), whose description lists peroxide cream developer as the necessary material.
What strength hydrogen peroxide whitens a skull?
Hydrogen peroxide from about 3 to 12 percent whitens a skull. The Arizona guide soaks air-dried skulls in roughly 3 to 6 percent, Norway's directorate uses 5 to 10 percent, and 40 volume hair developer is about 12 percent. The Arizona guide also warns that severe bleaching may break down bone tissue.
| Product label | Approximate peroxide strength | Source |
|---|---|---|
| Drugstore brown bottle | 3 percent | OddArticulations |
| 10 volume developer | 3 percent | OddArticulations |
| 20 volume developer | 6 percent | AZ1144, OddArticulations |
| 30 volume developer | 9 percent | AZ1144, OddArticulations |
| 40 volume developer | 12 percent | AZ1144, OddArticulations |
"Volume" is how beauty supply products are labeled, and the Arizona guide notes they can be diluted with water to the strength you want. Stronger peroxide exists: OddArticulations describes 27 to 35 percent pool "chlorine-free shock," says "anything over 12% is pretty strong," and warns that strong peroxide on the skin burns it and leaves it white for a few hours. The Arizona and Norwegian guides both whiten skulls at 10 percent or less.
Why won't my skull get white?
Check for grease first when a skull will not whiten. Peroxide cannot fix it: OddArticulations says bones that are not properly degreased will never turn out perfectly white. Degrease in warm water with clear dish soap until the bone is no longer yellow, translucent or waxy feeling, let it dry, then whiten again.
A forum member with a couple of decades of skull cleaning said the same in 2023 about a warthog skull that two coats of whitening paste had not improved: it was grease still in the bone. The reply added that pigs are notorious for being extra greasy, that the skull needed to soak in a degreasing agent, which can take up to a couple of weeks or longer, and that warm water with Dawn dish soap does the job (forum post, 2023). Another forum member suspected in 2020 that the yellowing on one skull came from "some kind of clear poly or something" put on by the professional who did the mount, not from grease (forum post, 2020). For the full cleaning and degreasing routine, follow our deer skull cleaning steps.
How do you whiten a deer skull by soaking it?
To whiten a deer skull by soaking, start with a clean, degreased, air-dried skull, wrap the antlers, and set the skull in roughly 3 to 6 percent peroxide, the Arizona guide's range, with the antlers held above it. Take it out when it is as white as you want, then rinse it thoroughly and let it dry completely.
- Start dry and degreased. The Arizona guide whitens air-dried skulls.
- Protect the antlers (see below) and pick out any bullet fragments, since OddArticulations warns that strong peroxide reacts violently with metals.
- Fill a plastic or glass tub with peroxide deep enough to cover the bone but not the antlers. A mesh bag catches loose teeth, as OddArticulations suggests.
- Watch it. The Arizona guide says most of the whitening is done when the solution stops bubbling. OddArticulations adds that no bubbles does not mean it is not working.
- Rinse thoroughly. Norway's directorate warns that unless the skull is rinsed well under running water, the peroxide keeps acting and the skull can gradually crumble.
- Dry it somewhere cool, as Norway's directorate advises, and let it dry completely before gluing teeth or sealing.
Warmth speeds things up. OddArticulations says heat and sunlight speed up the reaction of peroxide but warns not to boil it, because boiling causes bone damage, and suggests dunking the skull in hot tap water after a day or two in room temperature peroxide.
How do you whiten a skull with a peroxide paste?
To whiten a skull with a paste, mix 40 volume cream developer with a whitening powder into a paste, brush it over the outside of the skull, and leave it to work before washing it off. A paste needs little peroxide, but it only whitens the outside of the skull.
OddArticulations describes mixing developer with a white powder to the consistency you want, letting it sit until dry, then popping or washing it off, though the guide notes that its author has not used the developer method personally. A forum member wrote in 2025 of using peroxide paste with a hair bleaching powder, generally left wrapped in a garbage bag for about 24 hours, then, when a whiter skull is wanted, washed off, dried and given another coat (forum post, 2025). A 2023 reply on a warthog skull said to heat the skull to make the whitening paste work, wrap it in clear plastic wrap, let it set overnight under lights, and remove the tusks if possible (forum post, 2023). For video, see Top Pin Outdoors, How To Get Super White Skull Mounts (2022), whose chapters include mixing and applying a whitening paste.
How do you keep the antlers from turning white?
Keep the antlers safe by wrapping them before any whitening, then keeping them above the liquid in a soak and clear of the brush with a paste. MtL Outdoors' video on whitening a deer skull with peroxide cream developer wraps the antlers before mixing the formula.
The wrapping step is its own chapter, "Wrapping the antlers" at 2:53, in MtL Outdoors' How to Bleach a Deer Skull (CHEAP & EASY) (2019). A 2023 forum reply on a warthog skull gives the same advice for tusks: "Try to keep the paste off the tusks. Don't want those bleached." (forum post, 2023). For more on the antlers themselves, see our antler mount guide.
How long should a skull stay in peroxide?
A skull should stay in peroxide until it is as white as you want and no longer. OddArticulations suggests a day or two in 3 percent, or an hour or two at higher strength. Norway's directorate says a deer skull in 5 to 10 percent usually takes 24 hours, and warns against leaving it too long.
Whiter is not always better. The Arizona guide cautions that severe bleaching can make skulls look unnatural, remove features such as tooth stains in plant eaters, and may break down bone tissue, and says some bleaching "is probably best, but not enough to make them completely white." OddArticulations calls whitening "probably the shortest step" when the skull was properly cleaned first.
How do you work safely with hydrogen peroxide?
Work safely with hydrogen peroxide by wearing rubber or latex gloves and protective goggles, using a plastic or glass container, and keeping it away from metal, acetone and anything that burns. If peroxide gets in your eyes, the Arizona guide says to "flush the eyes with plenty of water and contact a physician immediately."
NIOSH's Pocket Guide entry, which covers hydrogen peroxide up to full strength, lists irritation of the eyes, nose and throat, corneal ulcer and skin redness among the symptoms of exposure, and notes that spontaneous combustion can follow if it touches combustible material. OddArticulations warns that strong peroxide reacts "very very violently with metals" and that even the smallest bullet fragment "can make 50% peroxide extremely hot and uncontrollable and can result in a very serious fire." Acetone, sometimes used for degreasing, has a flash point of 0°F according to NIOSH and is incompatible with oxidizers such as peroxide (NIOSH Pocket Guide, acetone).
Some of the product links below are affiliate links. Taxidermy Hobbyist may earn a commission on qualifying purchases at no extra cost to you. See our affiliate disclosure.
For gear, browse nitrile gloves and splash safety goggles on Amazon.
What does it cost to whiten a skull?
Whitening a deer skull at home costs the price of peroxide plus gloves and goggles. Matuska Taxidermy Supply lists 40 volume hydrogen peroxide at $5.95 to $26.95, and Van Dyke's lists a quart of hydrogen peroxide, item 4VP, at $8.75. For comparison, one Alaska studio lists a whitened and deodorized deer skull at $30 more than a cleaned one.
Matuska's listing says its 40 volume peroxide "Whitens a skull for European Antler Mounts" and is "strong enough to give snow-white results" (Matuska chemicals). Van Dyke's skull bleaching category also lists Quick White at $33.50, sodium carbonate at $8.25 for 2 pounds and magnesium carbonate at $10.75 for a pound (Van Dyke's skull bleaching). Skin and Bone in Fairbanks lists black bear, deer and wolf skulls at $120 cleaned and $150 whitened and deodorized (Skin and Bone price list). Prices were read November 21, 2026.
Developer is sold for hair at beauty supply stores, as the Arizona guide notes. To compare, browse 40 volume clear developer on Amazon and check that the label says 40 volume.
What should you do after whitening?
After whitening, rinse the skull thoroughly in clean water, let it dry completely somewhere cool, glue back any loose teeth, then seal it if you want. If grease shows through later, degrease again and rewhiten. Once dry, the skull is ready to hang on a hanger, bracket or plaque.
OddArticulations says stubborn grease occasionally surfaces after months or years, and the fix is to repeat degreasing. The Arizona guide seals finished skulls with half clear lacquer and half lacquer thinner, spray polyurethane, or half white glue and half water. To finish the job, see our European mount process, compare plaques and hangers, or read our review of the Skull Hooker bracket.
Frequently asked questions
Can the sun whiten a skull?
Yes, a little. The Arizona guide says skulls "may also be bleached by simply setting them out in the sun," and OddArticulations says sun after a peroxide bath can make a skull a bit whiter. Its teeth guide says fast, uneven drying, as in sun drying, is the main cause of cracked teeth, so keep sun time short.
Can you whiten a skull that was already bleached with chlorine?
The damage cannot be undone. OddArticulations says chlorine bleach damage to bone "is not stoppable, and is not reversible," and its author, who once left a first skull a few hours in very dilute bleach, expects that skull will likely show deterioration eventually. Handle a bleached skull gently, and never use chlorine bleach again.
Does whitening remove the smell?
Mostly. The Arizona guide says whitening "also removes most of the odor of the skulls." A smell that lasts can mean tissue is still inside: a 2021 forum reply pointed to "a pocket of nastiness at the back of the sinuses," which the poster clears by going through the brain cavity with a long screwdriver (forum post, 2021).