FishBy Taxidermy Hobbyist Editorial TeamUpdated November 22, 2026

Saltwater Fish Mounts: Sailfish, Marlin, Tarpon and Redfish

A sailfish mount today is usually a fiberglass replica, not the fish's own skin. You measure and photograph the fish, let it go, and a shop paints a copy, cast from a mold of a real sailfish, to match your photos. Marlin and tarpon mounts are usually made the same way, as half or full mounts; redfish are sold both as replicas and as skin mounts.

Why are most sailfish, marlin and tarpon mounts replicas?

Most billfish and tarpon mounts are replicas because the fish is usually released, and because skin mounts of big saltwater fish were hard to keep looking right. A 2016 Colorado Parks and Wildlife article traces replicas back to the 1970s, when marine taxidermists "used synthetic mounts almost exclusively for marlin, sailfish and other huge saltwater beasts" (Colorado Outdoors, 2016). The same article says a replica is gel-coat resin and fiberglass, with no fish parts in it, cast from molds taken from a donor fish.

The Fish Mount Store, a replica maker in Merritt Island, Florida, puts the switch earlier, in the mid 1960s, and gives its reasons: degreasing a skin meant weeks of chemical soaks, and when the oils weren't all removed, residue could ooze out, smell and draw insects while the mount slowly turned yellow (The Fish Mount Store). That's one maker's account of its own trade, so read it as such.

For tarpon in Florida, the law settles it. The Florida Fish and Wildlife Conservation Commission (FWC) calls tarpon "a catch-and-release only fishery," with one exception for anglers chasing a state or world record with a tarpon tag (FWC tarpon rules). So unless you hold a tag and are chasing a record, a Florida tarpon mount means a replica.

Mixed mounts exist too. One HuntingNet member described his billfish in 2006 as "skin over a fiber Body,real head and bill also," and added that "the sail is fiberglass as the real one shrinks quite a bit" (HuntingNet, 2006). That's one owner's mount, not a standard method.

What does a sailfish, marlin, tarpon or redfish mount cost?

Price follows length. The Fish Mount Store's sailfish page lists half mount replicas at $350 for 55 inches, $815 for 68 inches and $925 for 77 inches ("77L"), and Mount This Fish Company lists a 58-inch half mount at $348 and describes its half mounts as the affordable alternative to full mounts. These are named listings, checked on each seller's own page on November 22, 2026, not market averages.

SpeciesListing (seller's own wording)PriceSeller
Sailfish"58" Sailfish Half Mount Replica"$348.00Mount This Fish Company, Rockledge, FL
Sailfish"Sailfish 55 inch half mount fiberglass fish replica"$350.00The Fish Mount Store, Merritt Island, FL
Sailfish"Sailfish 68 inch half mount fiberglass fish replica"$815.00The Fish Mount Store
Sailfish"Sailfish 77L inch half mount fiberglass fish replica"$925.00The Fish Mount Store
Sailfish"Sailfish 68L inch full mount fiberglass fish replica"$1,495.00The Fish Mount Store
Blue marlin"Blue Marlin 55 inch half mount fiberglass fish replica"$350.00The Fish Mount Store
Blue marlin"89" Blue Marlin Half Mount Fish Replica"$623.00Mount This Fish Company
Blue marlin"97" Blue Marlin Full Mount - In Stock"$1,572.00 sale price (was $1,940.00)Mount This Fish Company
Tarpon"57" Tarpon Half Mount Fish Replica"$342.00Mount This Fish Company
Tarpon"74" Tarpon Full Mount"$1,184.00 sale price (was $1,480.00)Mount This Fish Company
Tarpon"Tarpon 47R inch full mount fiberglass fish replica"$1,050.00The Fish Mount Store
Redfish"29" Redfish Half Mount Fish Replica"$203.00Mount This Fish Company
Redfish"27" Redfish Full Mount"$432.00 sale price (was $540.00)Mount This Fish Company
Redfish"Redfish 30 inch full mount fiberglass fish replica"$660.00The Fish Mount Store

Sale prices can end, and shipping is extra on big pieces: The Fish Mount Store asks you to call or email for a shipping quote on some of them. The "L" and "R" in some listing names are the store's own labels; ask the seller what they mean for your fish before you order.

Local studios price saltwater fish by the inch instead. Gateswood Taxidermy in Robertsdale, Alabama, charges $27.00 per inch for reproduction fish on its 2026-2027 price list (current as of October 2026; the list says prices are subject to change without notice), with a 30% deposit and a $450 minimum, and adds a $7.00 charge on any fish longer than 60 inches (the list's layout leaves it unclear whether that is per inch, so ask). The same list prices saltwater skin mounts of flounder, speckle trout and redfish at $27 per inch with a $100 deposit and a $325 minimum (Gateswood price list). Laban's Taxidermy in Louisa, Virginia, lists saltwater fish at $22 per inch and saltwater fish replicas at $25 per inch on a prices page that shows no list year (checked November 22, 2026), and notes that its prices can change without notice (Laban's prices). Our guide to how per-inch fish pricing works explains the system. To compare quotes from a shop close to home, start with a fish taxidermist near you.

Should you buy a half mount or a full mount?

Buy a half mount if you want the lower price and a flatter fish that sits close to the wall; buy a full mount if you want the whole body of the fish, posed jumping or swimming. At The Fish Mount Store a standard full mount still hangs on the wall and is finished on one side; a mount finished on both sides is a separate option. Mount This Fish Company explains the difference: a full mount is cast as a front and a back that are bonded together and sanded at the seam, while a half mount is cast from the front only, which saves time and material (Mount This, half vs. full). The Fish Mount Store says its half mounts come from the same molds as its full mounts, with the same size, fins, paint and clear coat, and ship with a wire hanger on the back (The Fish Mount Store). The store also builds three dimensional mounts, finished on both sides, to hang from a ceiling or stand on a pedestal (full mount page).

Timing depends on the shop. Mount This quotes 40 to 45 days for regular production and 1.5 to 2 weeks for its Quick Production line, where blanks are cast ahead of time (Mount This, Need It Fast). The Fish Mount Store asks you to allow several weeks for a made-to-order replica. A big marlin is a lot of fish for one wall, so read up on hanging a heavy mount before it arrives.

What should you measure and photograph before you release the fish?

Measure the girth and the length, and take clear photos of the fish's color and markings, then get it back in the water. The Colorado Parks and Wildlife article gives the order: girth at the widest point first, then length from head to tail; then two to three photos that show the coloration, spot pattern and any unusual marks; and light the fish well, with the sun behind the photographer or a flash. Its advice is to work fast, because seconds count once a fish is out of the water (Colorado Outdoors).

  • Photograph all sides. Outdoor Life's fish taxidermy guide says a replica maker needs length and girth plus clean photos of every side, especially any unique marks (Outdoor Life).
  • Show the damage too, if you want it painted. Mount This says it will paint its two-sided sailfish mounts to match your photo "down to the last rip and tear" (Mount This sailfish page), but its 58-inch half mount page says the half-sided series is not custom painted.
  • Expect the shape to be close, not exact. The Colorado taxidermist in the 2016 article, Jeff Mourning, says that on replicas "the girth of the fish is pretty much fixed," so you'll need to be a little flexible.
  • Keep big tarpon in the water. FWC lets you hold a tarpon briefly for photos and a length and girth measurement, but a tarpon longer than 40 inches has to stay in the water (FWC tarpon FAQ).
  • Know the billfish rule. FWC says a sailfish you plan to release may not be taken out of the water in federal waters, or in state waters if you hold a federal HMS permit (FWC billfish rules). So plan to take those photos with the fish still in the water.

Lost the photos? The Fish Mount Store invites you to call even if all you have is a memory of the fish, and says you can simply tell it the kind, size, color and style you want (The Fish Mount Store).

How long does a saltwater skin mount last?

No study we found measures it, so here's what one forum thread says, member by member. In a 2012 HuntingNet thread about replicating a mutton snapper caught in the Bahamas, one member, HatchieLuvr, called a saltwater skin mount "temporary" and said you'd be "needing another in 10-20 years" once it starts peeling and drying out (HuntingNet, 2012). That's one member's view. Earlier in the thread he had said he fishes freshwater and had no saltwater taxidermy experience himself. Another member in the same thread, fritz1, who said he'd worked in taxidermy for more than 20 years, wrote that his shop does both skin mounts and fiberglass reproductions (thread).

Skin mounts of saltwater fish are still sold. Gateswood's 2026-2027 list, above, prices redfish skin mounts by the inch. If you're weighing the two, our page on skin mounts and replicas compared covers the trade-offs for all fish.

What are Florida's rules on keeping a tarpon, billfish or redfish?

Florida lets you keep a billfish or a redfish only within size and bag limits, and a tarpon only with a record tag. The rules below are FWC's, as posted on November 22, 2026. Other states set their own, and FWC asks anglers to check federal rules before targeting billfish in federal waters.

Frequently asked questions

How much does a sailfish mount cost?

It depends on length. Mount This Fish Company lists a 58-inch sailfish half mount replica at $348. The Fish Mount Store lists sailfish half mounts at $350 (55 inches), $815 (68 inches) and $925 (77 inches, "77L"), and a 68-inch ("68L") full mount at $1,495, all checked November 22, 2026. Shipping on big pieces can be extra.

Do you have to keep the fish to get a mount?

No. The Fish Mount Store says a catch-and-release angler can have a life-size replica made from good color photos and measurements, and Florida's tarpon rules make a replica the normal route for that fish.

Can a saltwater fish still be skin mounted?

Yes, some shops still offer it. Gateswood Taxidermy's 2026-2027 list prices redfish skin mounts at $27 per inch with a $325 minimum, subject to change without notice, and one HuntingNet member wrote in 2006 that his billfish is skin over a fiber body, with the real head and bill and a fiberglass sail. Another member warned in 2012 that a saltwater skin mount may need replacing in 10 to 20 years.

Can you take a tarpon out of the water for photos in Florida?

Only a tarpon of 40 inches or less. FWC lets you hold one briefly for photos and a length and girth measurement, but a bigger tarpon has to stay in the water unless you are pursuing a record with a tag (FWC tarpon FAQ).

Need a Professional?

Browse taxidermy studios, schools, suppliers and tanneries by state.

Find a Taxidermist Near You