A replica fish mount (also called a reproduction or fiberglass fish mount) is a painted resin and fiberglass cast of a fish, made so you can have the trophy on the wall without keeping the fish. The taxidermist matches a blank to your fish's species, length and girth, then paints it from your photos. On the studio price lists we checked, replicas run from a stated average of $20 per inch to $60 per inch for a custom cast. In the skin-versus-replica cost table on our fish mount guide, which compares each list's bass or general freshwater skin rate, the replica costs more per inch at 10 of the 13 studios. If you're still deciding between the two, our fish mount overview, linked below, compares them.
What is a replica fish mount made of?
A replica fish mount is usually made of gel-coat resin and fiberglass, cast in a mold taken from a real "donor" fish of that species and size, with no part of your fish in it. Colorado Parks and Wildlife's magazine describes how one donor fish produces "numerous fiberglass blanks," which are sold to taxidermists to finish (Colorado Outdoors, 2016). The same article says fiberglass reproductions first appeared in the 1970s, when marine taxidermists used them for marlin and sailfish.
The mold-making itself is simple to picture. In a 2015 product video, Smooth-On molds a real trout in Ecoflex 00-35 silicone, which it says sets fast and "is not affected by the low temperature of the fish specimen," then casts it in Smooth-Cast 61D urethane resin (Smooth-On). Supply houses sell unpainted blanks to taxidermists: Matuska Taxidermy Supply lists its largemouth bass reproduction (head out, tail out) at $127.25 to $375.95 across its options (Matuska, checked November 22, 2026), and McKenzie Taxidermy Supply showed its Arp 3-D line in a 2009 video (McKenzie video).
What's the difference between a commercial replica and a custom cast?
A commercial (stock) replica is a ready-made blank picked to match your measurements; a custom cast is molded from your own fish. The stock version needs only photos and measurements and costs less. The custom version needs the actual fish (fresh and in good condition at Mount N Critters; Taxidermy Guy accepts it frozen) and copies its exact shape.
| Commercial (stock blank) | Custom cast | |
|---|---|---|
| What you provide | Photos, length, girth | The fish itself (fresh at Mount N Critters; frozen is fine at Taxidermy Guy) |
| How close to your fish | Closest blank the studio can order; shape "may vary" | Cast from your fish |
| Mount N Critters (WV) price | $40 per inch, $800 minimum | $60 per inch, $1,200 minimum |
| Taxidermy Guy price | From $25 per inch up to 39 inches, $450 minimum | Add $10 per inch, $180 minimum |
Sources: Mount N Critters Taxidermy; Taxidermy Guy.
A stock blank won't always match your fish's size. A HuntingNet member said his taxidermist explained that you "write down the specs and the company sends [the] taxidermist the blank...he simply paints it," and his 10-pound bass "looked like an 8 pounder." He paid $457 and got $200 back (HuntingNet, 2012). Outdoor Life's writer ran into the size steps too: his striper measured 50.5 inches and the molds came in 48, 50 and 52 (Outdoor Life). Back in 2006 a replica maker on the same forum put it plainly: "we have molds in stock and we will get as close as possible" (thread). Ask which one you're buying before you pay.
How much does a replica fish mount cost?
On the studio lists below, a replica runs from a stated average of $20 per inch to $55 per inch, and 5 of the 12 list a dollar minimum. A custom cast of your own fish starts at $35 per inch at Taxidermy Guy (its replicas start at $25 per inch, up to 39 inches long, plus $10 per inch to cast your fish) and is $60 per inch at Mount N Critters, as in the table above. A ready-made replica bought online, without a taxidermist painting your fish, can cost less; there is an example below.
| Studio (state) | Replica rate | Minimum or note |
|---|---|---|
| Gunners Taxidermy (KY) | "average $20.00 per inch" | priced per request |
| Wild Outdoor Taxidermy (IL) | $22/in | $350 minimum; driftwood base included |
| Open Acres Taxidermy (VA) | $22/in | 6-inch minimum; 2026/2027 list |
| Mounted Memories (MN) | $26/in | |
| Gateswood Taxidermy (AL) | $27/in | $450 minimum; $7/in more over 60 inches; 2026-2027 list |
| Karen's Taxidermy (AR) | $28/in | list dated June 2024 |
| Jim's Taxidermy (OH) | $28/in | $150 fish minimum |
| Mainely Taxidermy (ME) | $30/in | shipping, bases and taxes extra |
| CK Taxidermy (MN) | $32/in | $500 minimum; prices are estimates; list dated October 2023 |
| Shawn's Taxidermy (MN) | "Average price is $32.00 per inch" | |
| Stehling's Taxidermy (WI) | $35/in | reproductions only, no skin mounts now |
| Foothills Taxidermy (OR) | $55/in | $1,000 minimum; 2025 list |
Two things surprise people. First, a replica usually isn't the cheaper option: at 10 of the 13 studios in the skin-versus-replica cost table on our fish mount guide, which compares each list's bass or general freshwater skin rate, the replica costs more per inch. Among the lists outside that table that publish both rates, T & T Taxidermy (WV) charges the same $25 per inch for a fish 21 inches or longer and for a replica, and Laban's Taxidermy (VA) gives a replica rate only for saltwater fish, $25 per inch against $22 for a saltwater skin mount. A 2016 Colorado Parks and Wildlife article found the same as our table for Colorado, where replicas ran $12 to $20 per inch, "slightly more expensive than comparable skin mounts" (Colorado Outdoors, 2016). Second, the minimum can decide the bill on small fish: a 12-inch fish at Gateswood's $27 rate is $324 on paper, but the $450 minimum applies.
If you don't need your own fish's markings painted, a ready-made replica can cost less. For one example, The Fish Mount Store lists a 19-inch smallmouth bass half mount at $230, about $12 an inch, though a half mount shows only one side of the fish (The Fish Mount Store, checked November 22, 2026). A half mount is a one-sided ("half sided") replica made to hang on a wall; that store details the mouth and adds a pair of pelvic fins and sells them facing left or right. For per-species numbers on a bass fish mount, see our bass page.
Is a replica better than a skin mount?
A replica is the better choice when you want to release or eat the fish, when your species is one some studios only do as a replica, or when your studio turns replicas around faster (Bauman's says it does). A skin mount is the better choice when owning the actual fish is the point. Neither is better on looks alone: both are only as good as the painter.
| Replica | Skin mount | |
|---|---|---|
| Fish needed | No (stock) or yes (custom cast) | Yes, the fish itself |
| Durability | Outdoor Life: replicas "never rot or seep oil" and are easy to repair | One HuntingNet member: a saltwater skin mount is "temporary," needing replacement "in 10-20 years" once it starts peeling (2012) |
| Species limits | Fricke's (OH) mounts salmon, trout and catfish as replicas only; Dream Season (NY) does lake trout only as reproductions; Stehling's (WI) isn't accepting fish skin mounts right now. | |
| Speed | It depends on the shop. Bauman's (OK): "Choose a Reproduction Fish for the quickest turn around time." Mounted Memories (MN) gives one figure for all its fish mounts, replicas included: "Fish mount completion time is generally 12 months." | |
Anglers argue both sides. A HuntingNet member wrote that a replica "should look good forever, the skin will not crack, and the fins will not deteriorate" (2017). Another said he'd seen replica painters "match dot for dot the specks you see on a brook trout" (2017). In the same thread, a third called most replicas "a plastic toy" and wanted a skin mount for freshwater fish (thread). Mixed mounts exist too: one member's billfish is real skin, head and bill over a fiber body with a fiberglass sail, because "the real one shrinks quite a bit" (2006).
If you'd rather try a skin mount on a small fish first, our guide on how to mount a fish yourself lists the supplies and steps.
What does the taxidermist need for a catch-and-release replica?
For a catch-and-release fish mount, the taxidermist needs the fish's length, its girth at the widest point, and clear photos of its color and markings, all taken before release. That's the whole list for a stock replica.
- Girth first, then length. Colorado Parks and Wildlife's steps (Colorado Outdoors): measure girth at the widest point, then length from head to tail, and work fast so the fish goes back quickly. Idaho Fish and Game's record rules measure total length "from the tip of the snout to the end of the tail, with lobes of tail squeezed together" (IDFG).
- Two to three photos, plus close-ups. CPW asks for the coloration, spot pattern and any unusual markings, a close-up of the head, and wide and close shots of the body, with the sun at the photographer's back.
- Close-ups of anything unusual. Mainely Taxidermy asks for as many pictures as possible of unique features you want on the replica (Mainely Taxidermy), and Vance Wildlife Taxidermy recommends "a good, clear side picture" (Vance).
- Ask before the trip. A HuntingNet member's advice: select the taxidermist before you catch the fish and ask exactly what to bring (2017).
Our guide on how to measure a fish for a replica covers measuring in more detail, plus what to do if you keep the fish instead.
How is a replica painted?
A replica is airbrushed from your photos, base coat first and fine detail last. Kevin Stenzel, who describes himself as a retired fish taxidermist with over 50 years of experience, filmed the whole job on his wife's 10-pound 11-ounce largemouth. His preparation video covers preparing the purchased blank, installing the mouth insert, mouth foam and fitting the eye, setting the glass eye, and attaching and blending the fins (preparation video). Part 1 of his two-part painting series goes through antiquing and a lacquer base, scale detail, body shading and pearls, candy colors, blending and the fins, then a last pass of scale detail and final detailing (painting video).
NPR reported that Lax Reproductions in Wisconsin injects each model with foam "so it doesn't crack" and builds the color with shading from a few colors (NPR, 2021). When you're ready to order, find a fish taxidermist whose painted replicas of your species you've seen in person.
Frequently asked questions
Can a replica be made of a fish I already have in the freezer?
At some studios, yes. Taxidermy Guy says you can "send your frozen fish to have an exact fiberglass reproduction made of it." For a custom cast, Mount N Critters requires the fish to be fresh and in good condition, so ask the studio before you ship. None of the studio pages we checked say whether they will cast a fish that's already mounted.
Can I get a replica of a pet aquarium fish?
Possibly, but ask first. On a 2006 HuntingNet thread about a large pet aquarium fish, a member suggested "a quality reproduction" instead of a skin mount (HuntingNet). Ask a studio that casts customers' own fish, such as Taxidermy Guy ("send me your fish to cast"); at least one studio turns pets away: Bauman's Taxidermy says "No Domestic Pets Accepted." Another member, a discus breeder, warned in January 2007 that a fish left to die of old age "will probably be in rough shape" (HuntingNet).
How long does a replica take?
It depends on the shop. Bauman's Taxidermy calls reproductions its quickest option; NPR reported that musky replicas from Lax Reproductions take six to eight months to ship once ordered.
Are replica fish mounts real taxidermy?
The shops treat them as part of the trade. Mount This Fish Company says the terms "fish mount" and "fish replica" get used for the same kinds of reproduction products, and many of the studios above price both.