Faux taxidermy is wall decor shaped like a mounted animal head, made from resin, paper, felt, wood, cardboard or plastic instead of a real animal. It gives a room the look of a trophy wall with no animal inside, and the pieces run from realistic, hand-painted moose heads to bright, handmade paper and felt animals.
This roundup compares the materials, names makers whose own listings were checked in November 2026, covers the replica skulls and fish replicas that sit between decor and real taxidermy, and walks through making a paper head yourself.
What is faux taxidermy?
Faux taxidermy, also called fake taxidermy, is any piece made to look like a mounted animal without using the animal. That covers wall decor in resin, papier-mache, felt, wood or cardboard, and, at the realistic end, replica skulls and fish replicas cast from or modeled on real animals.
The look borrows from the trophy heads and museum mounts of the real craft. For that backstory, start with who invented taxidermy. The rest of this page is about the pieces themselves: what they're made of, who makes them, what they cost and how to look after them.
What is faux taxidermy made of?
The materials you'll meet are cast resin, papier-mache, wool felt, wood and cardboard, with cast resin and 3D-printed plastic for replica skulls. The material sets the look, the weight and the care. A hand-painted resin moose from Design Toscano weighs 10 pounds, while a felt head needs gentle spot cleaning and protection from clothes moths.
| Material | Example checked | What the maker or source says | Care note |
|---|---|---|---|
| Cast resin | Design Toscano Alaskan Moose Trophy Wall Sculpture | Hand-cast from crushed stone bonded with resin, hand-painted, 10 pounds | No wool, fur, feathers or skin for fabric pests |
| Papier-mache | Abigail Brown heads; Lia Griffith's DIY project | Made to order (Brown); newspaper and wheat paste over a foam core base (Griffith) | Hangs from a single eye hook in the DIY version |
| Wool felt | Sew Heart Felt animal heads | Needle-felted organic Tibetan lamb's wool | Spot clean with a damp cloth; wool is clothes moth food |
| Wood or cardboard | No maker's own page checked | Search links only below | Check the listing for size and hanging hardware |
| Replica skull (resin or printed) | Bone Clones casts; 3D-printed skulls from Rokslide members (2026) | Polyurethane resin casts (Bone Clones); PLA plastic prints (Rokslide member, 2026) | Printed and replica skulls are used with real antlers on Rokslide; see the replica section |
Who makes faux animal heads, and what do they cost?
The prices below come from each maker's own listing, checked November 2026. A realistic resin moose from Design Toscano was listed at $199.00, Abigail Brown's handmade paper heads run £105.00 to £210.00, and Sew Heart Felt's felt swan head was listed at £94.99. Wood and cardboard heads appear as search links only, since no maker's own page could be checked.
Some of the product links below are affiliate links. Taxidermy Hobbyist may earn a commission on qualifying purchases at no extra cost to you. See our affiliate disclosure.
Resin: Design Toscano
Design Toscano's Alaskan Moose Trophy Wall Sculpture is "hand-cast using real crushed stone bonded with high quality designer resin," hand-painted by its artisans, and listed at 10 pounds. The listing calls it a "scaled replica" sculpted "from arching antlers to bright eyes." It was listed at $199.00 (checked November 2026).
To compare other resin heads, search Amazon for a faux deer head and read each listing for its material and weight.
Papier-mache: Abigail Brown
British artist Abigail Brown, who works in Walthamstow, east London, makes paper mache animal heads to order. Her listing page showed heads from £105.00 to £210.00 and said the wait was a minimum of six weeks (checked November 2026). The same page says she is taking only a small number of orders for now and asks buyers to get in touch before ordering. She also takes commissions for animals that aren't in her gallery.
To compare more paper heads, search Amazon for paper mache animal heads and check each listing for its material and size.
Felt: Sew Heart Felt
Sew Heart Felt's felt animal heads are needle-felted from organic Tibetan lamb's wool in workshops in Kathmandu, where the company says it is "committed to fair employment of over 200 women." Its Odette Swan Head measures about 50 cm by 30 cm and was £94.99 on the store's own listing, and the version with wings £119.99 (checked November 2026).
For other soft heads, search Amazon for felt animal heads.
Wood and cardboard
No wood or cardboard maker's own page could be checked for this guide, so there's no maker or price to name here. Search Amazon for wooden animal heads or cardboard animal heads, and check each listing for its size and hanging hardware.
Replica skulls: Bone Clones
The US maker Bone Clones, which began in 1993, sells only replicas: "All items sold on this website are replicas; no real/natural bone is available on this site." It makes molds of original specimens and casts them in a custom polyurethane resin. YouTuber Miranda Pietzsch lists Bone Clones under "Get your own ethically sourced skulls" in the description of her 2025 video Please Don't Buy Taxidermy from Amazon.
Why choose faux over a real mount?
Faux decor needs no hunt and no tanning, and wildlife laws are written about wild animals and their parts, which a resin, paper or felt head doesn't contain. Resin also has none of the wool, fur or feathers fabric pests eat. What faux can't do is keep one particular animal, like your own buck.
The legal point is simple to check. Federal law makes it unlawful to possess, offer for sale or sell a native migratory bird or any part of one unless a federal rule or permit allows it (16 U.S.C. 703), and it bars selling listed endangered fish or wildlife in interstate or foreign commerce (16 U.S.C. 1538). A felt swan or a paper kingfisher contains no bird.
Pests are the other difference. The University of California's IPM program says carpet beetles damage fabrics, furs and "preserved specimens such as taxidermies" (UC IPM, Carpet Beetles), and real mounts need regular checks for insect damage. A resin head gives them nothing to eat. Felt is different, because clothes moths feed on wool, wool felt included (UC IPM, Clothes Moths).
If the bigger question is whether real taxidermy sits right with you, our page on is taxidermy ethical sets out what the sources and laws say. Artists who use real taxidermy materials in unexpected ways are a different scene again, covered under rogue taxidermy.
Can you use real antlers or your own catch with a replica?
Yes. On Rokslide, a hunting forum, members in threads from 2025 and 2026 describe fixing real antlers, including shed antlers and antlers sawed off at the base, to replica or 3D-printed skulls. Anglers can have a fish replica made from photos and measurements, a HuntingNet member wrote in 2017, without bringing in the fish.
"Does anyone know of a replica skull for euro mounts that looks realistic? The kind you just attach your antlers to," one member asked on Rokslide in December 2025. Another member who had sawed his elk antlers off at the base asked how hard it was to line them up again, and a reply in the same thread advised holding the antlers to the skull where you like them and having someone mark the skull pedicle and antler burr in pencil, so the marks can be matched later.
Cost varies widely by route. In a Rokslide thread on 3D-printed skulls, one member reported in April 2026 printing a skull for a set of sheds in cheap white PLA plastic, and in May estimated $5 to $10 worth of filament per skull. Another member reported in April 2026 that good-looking replica sheep skulls cost $250 to $400 each. The finished piece reads like a European deer mount, with a cast or printed skull in place of a cleaned real one.
For a ready-made skull to fit your own antlers, search Amazon for replica deer skulls for antlers and check each listing for its material and size.
Fish work the same way. Asking about a mount for his stepson in 2017, one HuntingNet member wrote that of the fiberglass replicas he'd seen, "some look really good and some look like a plastic toy" (HuntingNet, 2017). A reply that day said the taxidermist needs "only the photos and the measurements," and advised choosing the taxidermist before catching the fish and asking exactly what to bring (HuntingNet, 2017). Kentucky Afield's segment Replica vs. Skin Fish Mounts covers the same choice, and our guide to fish taxidermy covers skin mounts.
How do you make a faux taxidermy head yourself?
The paper mache animal head tutorial on Lia Griffith's site needs newspaper, wheat paste, masking tape, floral wire, an eye hook and acrylic paint. Each head is built on a foam core circle that hangs flush to the wall, bulked out with taped balls of newspaper, covered in paste-soaked strips, then painted and fitted with an eye hook.
These steps follow the 2018 tutorial on her site, made by guest designer Jessica of Bramble Workshop:
- Print the template, cut the foam core circle for the base, and bend floral wire for the ears.
- Tape crumpled balls of newspaper onto the circle to build the head. Push in the wire ear forms and secure them with a low temperature hot glue gun.
- Cover the whole head and ears with masking tape.
- Dip newspaper strips in wheat paste, slide two fingers down each strip to remove the excess, and lay overlapping strips until the head is covered. Let it dry overnight.
- Paint the head white, pencil in the eyes, nose and other features, then paint the base color and the details.
- Screw an eye hook into the back center, add hot glue to secure it, and hang the head from it.
The tutorial also recommends looking at photos of the animal from different angles while you shape it. The site sells the printable template and instructions as a premium project, $14.99 as a one-time purchase (checked November 2026). For skulls, the 3D-printing route in the replica section works too: the Rokslide member who printed one in white PLA in 2026 thought bone-colored filament and a little paint would make it look good.
How do you hang and care for faux taxidermy?
Check the weight before you pick a hook or anchor: Design Toscano lists its resin moose at 10 pounds, while the DIY paper heads above hang from a single eye hook. Then clean by material: dust resin, wood and cardboard, spot clean felt with a damp cloth as its maker advises, and watch anything made of wool for clothes moths.
- Felt: Sew Heart Felt's care line is "Dampen a soft, clean cloth with cool water and spot clean."
- Wool: clothes moths feed on stored woolens and wool felt, and "will feed on synthetics or cotton blends if these fabrics also contain wool," UC IPM says. Its carpet beetle notes advise inspecting stored woolens and furs and airing them in the sun once a year.
- Resin and plastic: no animal fibers, so dusting is the job.
- Next to real mounts: a wall that mixes faux and real pieces needs the real ones looked after on their own schedule; see our trophy care guide.
Frequently asked questions
Is faux taxidermy the same as a replica mount?
They're close cousins. Faux taxidermy usually means decor shaped like an animal. A replica mount is a cast or printed copy of a real animal or skull, often finished with your own antlers or made to your fish's measurements.
Does fake taxidermy attract bugs?
Resin and plastic pieces contain none of the wool, fur or feathers that carpet beetles and clothes moths eat. Wool felt is different: UC IPM lists wool felt among the things clothes moths feed on.
Is faux taxidermy legal in the US?
In the US, the federal laws cited above apply to protected birds and wildlife and their parts, and an all-resin, paper, felt, wood or cardboard piece contains none. If a listing says a piece includes real feathers, fur, horn or bone, those parts can fall under wildlife rules, depending on the species. Real remains are a different matter, all the way to the question of whether human taxidermy is legal.
Is a jackalope faux taxidermy?
A classic jackalope mount is a real jackrabbit or hare skin with antlers added, so it's real taxidermy built as a joke. Our page on the real jackalope has the story.
What's the difference between faux taxidermy and bad taxidermy?
Faux taxidermy is made without an animal on purpose. Bad taxidermy is a real animal mounted poorly. For examples of the second kind, see our page on bad animal taxidermy.