Taxidermy molding and casting is how you turn a real fish, a set of antlers, a skull or a slab of creek bed into a copy you can paint, mount and keep. You make a flexible or rigid mold around the original, then fill it with plaster, resin or putty.
What do taxidermists mold and cast?
More than fish. Smooth-On, a mold rubber maker, names taxidermist Tony Breedlove of Wildlife Art Creations as one who reproduces fish, reptiles, game and other wildlife with its rubbers, plastics, foams and pigments (Smooth-On taxidermy page). The common jobs look like this:
- Fish. Smooth-On's tutorial molds an actual trout in silicone and casts it in a tinted urethane resin (Smooth-On fish mold tutorial).
- Heads and jaws. Matuska Taxidermy Supply sells Polycast casting plastic for "fish heads and jawsets," and lists auto-body filler as a way to cast fish heads (Matuska Molding & Casting).
- Antlers. One Louisiana taxidermist quoted by Smooth-On says he used to pay someone else for antler molds and now makes them himself; he names two materials: a silicone, Mold Max Stroke, and a plastic, Smooth-Cast 320 (Smooth-On).
- Skulls. A Smooth-On demonstration casts a bear skull by rotating the mold by hand with Smooth-Cast 57D and pours the jawbone solid (bear skull cold casting).
- Rocks and habitat. Smooth-On took an impression of a real riverbed in silicone, filled the cured mold with epoxy putty, then painted the casting and mounted a cast trout on top (habitat base tutorial). Matuska says its brushable molding latex works for rock molds and can be reused.
If you're still learning the whole taxidermy process, from skinning to a finished mammal, read our taxidermy process guide first.
Which materials work for taxidermy molding and casting?
Sort materials into two groups: what the mold is made of, and what you pour into it.
| Material | Mold or cast | What the maker or supplier says it does |
|---|---|---|
| Platinum silicone (Ecoflex, Dragon Skin, Mold Star) | Mold | Ecoflex 00-35 FAST sets very fast, and Smooth-On says the fish's low temperature doesn't affect it (Smooth-On). Dragon Skin stretches off complex antlers without tearing (Smooth-On). |
| Molding latex | Mold | A brush-on rubber; Matuska lists rock molds and other animal parts as uses and says the molds take repeated use without damage. |
| Molding plaster | Mold or cast | Matuska pitches its #1 molding plaster for "reference casts, half-cast fish molds, base work," and its Zehner fish casting plaster for picking up skin and scale detail. |
| Urethane casting resin (Smooth-Cast) | Cast | Smooth-On describes 61D as a semi-rigid urethane that stands up to impact. It mixes 1A:1B by volume, and the thin, low-viscosity mix traps fewer bubbles (Smooth-On). |
| Polyester resin and fiberglass mat | Cast or mother mold | Matuska lists polyester resin for "fiberglass fish work, small bases, large habitats, and mold making," plus 1.5 oz fiberglass matte to lay up with it. |
| Epoxy putty | Cast | Pressed into a cured silicone mold for a habitat base (Smooth-On). |
| Fast casting plastic (Polycast) | Cast | Matuska lists "a 4 minute work time" and an 8 minute set, aimed at heads and jawsets. |
Undercuts decide a lot. For an original with deep undercuts, Smooth-On's cut block tutorial points you to a rubber that's both strong and flexible, naming platinum silicone as one option, and its antler tutorial picks Dragon Skin because the mold has to come off complex points without tearing. Plaster suits the jobs Matuska lists for it, from bases to reference casts. The casting side is wider: urethane resin, epoxy putty, polyester resin with fiberglass mat, plaster, Polycast and auto-body filler all appear above.
How do you mold a fish for a replica?
Smooth-On's trout tutorial gives a start-to-finish example. Its materials list names the trout itself, Smooth-Cast 61D with So-Strong colorants, melamine board, acrylic panels, non-sulfur clay, a metal dowel, a hot glue gun, Ecoflex 00-35, mold straps, an airbrush and acrylic paint (Smooth-On fish tutorial; video). Pulling that together with the Ecoflex technical bulletin, the work runs like this:
- Build the mold box. The tutorial's list includes melamine board, acrylic panels and non-sulfur clay. Stick to a clay without sulfur: the bulletin lists sulfur clays among the things that can stop platinum silicone from curing (Ecoflex 00-35 FAST bulletin).
- Glove up with vinyl. The same bulletin says to wear vinyl gloves only, because "Latex gloves will inhibit the cure of the rubber."
- Mix 1A:1B and move fast. Its bulletin lists a 2.5 minute pot life and a 5 minute cure at 73°F. Don't cure it anywhere colder than 65°F.
- Pour low and let it rise. Keep the stream in one place, aimed at the box's lowest point, and the rubber will climb over the fish without help. Finish with at least 1/2 inch of rubber over the fish's highest point.
- Demold, then cast. The list also includes mold straps, an airbrush and acrylic paint, and the overview says the casting resin, Smooth-Cast 61D, is colored with So-Strong pigments. Our sibling guide on fish painting taxidermy covers the paint side.
Should you get a replica or a skin mount of your fish?
Anglers keep asking this on hunting forums, and the answers split. On a 2017 HuntingNet thread, one member said he'd go with a replica because it won't deteriorate like a real skin, and that the shop needs accurate length and girth plus lots of photos for the paint job, not the fish itself (Fish: Mounts or Replicas?). Another member in the same thread pointed out that a real fish can get damaged before anyone works on it, and "colors of the fish will fade fast after death." A third said that before a fishing trip his taxidermist asked for length and girth, several photos, and a butcher-paper tracing of the fish's outline; he added that greasy freshwater species such as paddlefish, along with most saltwater fish, suit a replica better, since grease works its way out of a real skin over time.
Know what you're buying, though. A replica isn't always cast from your fish. On a 2006 HuntingNet thread, a member who wrote that "We can make a replica of just any species" said they keep molds in stock and get "as close as possible" to your size from your length and widest girth (Replica Fish Question). And on a 2012 thread, one member said his taxidermist explained it this way: the customer writes down the specs, a company supplies the blank, and the taxidermist's job is to paint it; his 10 pound bass "looked like an 8 pounder," cost $457, and he got $200 back (forum member, 2012, Plastic fish?).
So ask the shop one question before you pay: is this cast from my fish, or from a stock blank close to its size? Our fish taxidermy guide walks through the skin-versus-replica trade-offs and costs in more detail.
One-piece block mold or a rubber skin with a mother mold?
In a one-piece mold, the original sits inside a single rubber block that you slit open to get it out. Smooth-On's cut block mold tutorial cuts down one side in a zig-zag so the two edges lock back together like puzzle pieces, and it says this style keeps seam lines to a minimum, which means less cleanup on every casting (one piece cut block mold). Its plaster original had deep undercuts, and for that kind of shape the tutorial recommends platinum silicone or another rubber with both strength and flexibility.
The other approach builds a soft rubber skin over the original in coats, then backs it with a rigid shell made in sections, which Smooth-On calls a mother mold. Smooth-On's antler tutorial, featuring taxidermist James Edgar, applies Dragon Skin in three coats, sets clay shims, and builds the shell from Plasti-Paste in sections, with a release coat between them. Once it cures, the shell comes apart, the rubber is slit along one side and peeled off, then seated back in the shell, which is screwed shut for the Smooth-Cast 300 pour (Dragon Skin antler tutorial). A Smooth-On reptile how-to builds its shell from fiberglass mat and polyester resin, then backfills a hand-rotated resin skin with expanding foam to keep the casting light (Smooth-On reptile how-to).
Planning to set real antlers on a cast or replica skull instead? On Rokslide in 2025, one member said to hold the antlers where you want them, pencil a mark across the skull pedicle and the antler burr, then line up the marks and drill through the pedicle into the antler base (Replica skulls thread). Our guide to mounting antlers covers skull cap and plaque methods.
When do you need a mold release?
It depends on what touches what. Smooth-On's 61D page says most surfaces you cast resin into or over will need a release agent. A Smooth-On silicone mold is the exception: it rarely needs one unless the casting material is itself silicone. A release still makes a mold last longer (Smooth-Cast 61D). Smooth-On's routine is a soft brush over every surface, then a light mist on top, then 30 minutes for it to dry.
Mann Ease Release 200 shows up in the Ecoflex bulletin, the 61D page and the antler tutorial. Its product page says it will release "polyurethane elastomers, epoxy resin, polyester resins, RTV silicones," among other materials (Ease Release 200). For polyester and epoxy work, Matuska also sells Partall #2 paste wax and says it can work by itself as a release for "epoxies, polyesters and urethane foams."
Porous originals need one more step. In the cut block tutorial, the plaster original got a coat of sealer first, so liquid rubber couldn't work into its pores and grip them (Smooth-On). The Ecoflex bulletin adds that a coat or more of clear acrylic lacquer usually prevents cure problems on a model, and it recommends a small test on a spot that doesn't matter when you're unsure (Ecoflex bulletin).
How do you keep bubbles out of a mold or cast?
Bubbles come from trapped air and, with urethanes, from moisture. The manufacturer's fixes:
- Thin first coat. On the antler mold, the opening Dragon Skin layer is kept thin, which the tutorial says cuts down on air bubbles (Smooth-On).
- Pour low, high and thin. Aim the pour at the deepest spot so the material levels itself. In the cut block tutorial, a thin stream poured from well above the box pops bubbles the vacuum missed (Smooth-On).
- Vacuum the rubber. The same tutorial pulls a vacuum of 29 inches of mercury on the mixed silicone. Leave headroom in the container, because the rubber foams up and then drops back.
- Pressure the resin. Smooth-On says the best 61D castings come from setting the whole filled mold in a pressure chamber at 60 PSI for the full cure (Smooth-Cast 61D).
- Keep it dry. The Smooth-Cast semi-rigids bulletin warns that moisture in the air reacts with any liquid urethane and shows up as bubbles, so it asks you to work where relative humidity is under 50% (Smooth-Cast semi-rigids bulletin).
What safety gear do resins and silicones call for?
Read the safety data sheet (SDS) for every product before you open it. The SDS that covers Smooth-Cast Part A, including 61D, carries the signal word "Danger," lists MDI (an isocyanate) as an ingredient, and warns that Part A "May cause allergy or asthma symptoms or breathing difficulties if inhaled." The same label section also lists "May cause an allergic skin reaction." and "Suspected of causing cancer." Its precautions read "Use only outdoors or in a well-ventilated area." It also calls for respiratory protection when ventilation isn't adequate (Smooth-Cast Part A SDS, revised October 6, 2023).
The 61D product page adds practical points: work with at least room-size ventilation, put on safety glasses, rubber gloves and long sleeves, let thick castings cool because they can be hot enough to irritate skin, and wear breathing protection if you machine the cured plastic (Smooth-Cast 61D). The Ease Release 200 page asks for the same ventilation, glasses, sleeves and gloves. For platinum silicones, remember the vinyl-gloves rule from the Ecoflex bulletin. Our taxidermy safety guide covers shop ventilation and chemicals more broadly.
What do molding and casting supplies cost?
Prices below were read on the supplier pages on November 22, 2026, with the size where the listing shows one. They change, so check before you order.
| Item | Price | Size | Supplier |
|---|---|---|---|
| Brush On Silicone Rubber | $30.00 | 1 lb kit | Van Dyke's |
| Dragon Skin Silicone Rubber | $305.00 | 2 gallon kit | Van Dyke's |
| Mold Max 20 | $48.50 | 2.2 pound kit | Van Dyke's |
| Smooth-Cast 320 | $49.50 | pint kit | Van Dyke's |
| Mann Ease Release 200 | $19.50 | size not shown | Van Dyke's |
| Plaster (#1 Molding) | $22.95 | 25 lbs | Matuska |
| Plaster (Fish Casting) by Zehner | $31.95 | size not shown | Matuska |
| Molding Latex | $28.50 | size not shown | Matuska |
| Fiberglass Matte (1.5 oz) | $6.95 | sold by the yard | Matuska |
| Polyester Resin | $17.95 to $57.95 | by option | Matuska |
For a first practice piece, a 1 lb brush-on silicone kit ($30.00) or 25 lb of #1 molding plaster ($22.95) keeps the outlay small. For rocks, foams and the rest of a scene, see our taxidermy habitat supplies guide.
Some of the product links below are affiliate links. Taxidermy Hobbyist may earn a commission on qualifying purchases at no extra cost to you. See our affiliate disclosure.
You can also browse silicone mold making rubber and urethane casting resin on Amazon.
Know the law before you mold a real specimen.
- Molding copies an original, so make sure the original is yours to keep first, especially a skull, antlers or a whole animal you found or were given. Check our taxidermy laws by state page and your state wildlife agency's rules before you start.
Frequently asked questions
Can you mold a fish straight from the cooler?
Smooth-On says Ecoflex 00-35 isn't affected by a cold fish. Its bulletin still says not to cure the rubber below 65°F, so keep the room warm even if the fish isn't.
Is a replica fish cast from my actual fish?
Not always. HuntingNet members described shops working from stock molds or blanks sized from your measurements, not from the fish itself. Ask before you order.
Do you need a vacuum chamber or pressure pot?
Not to start. Smooth-On uses them for its cleanest results (29 inches of mercury to degas rubber, 60 PSI on resin), but its tutorials also lean on thin first coats and a low pour.
Does a silicone mold need a release agent?
Usually not. Smooth-On's 61D page says its silicone molds rarely need one unless you cast silicone into them, though a release coat makes the mold last longer.
Sources
- Smooth-On, Taxidermy with Smooth-On Materials (read November 22, 2026)
- Smooth-On, fish mold tutorial (trout) and its video, YouTube, 2015 (description read November 22, 2026)
- Smooth-On, Ecoflex 00-35 FAST technical bulletin (read November 22, 2026)
- Smooth-On, Smooth-Cast 61D and Smooth-Cast semi-rigids technical bulletin (read November 22, 2026)
- Smooth-On, Smooth-Cast Part A safety data sheet (revised October 6, 2023)
- Smooth-On, Ease Release 200 (read November 22, 2026)
- Smooth-On tutorials: Dragon Skin antlers; one piece cut block mold; reptile mold and cast; bear skull cold casting; taxidermy habitat base (read November 22, 2026)
- Matuska Taxidermy Supply, Molding & Casting (read November 22, 2026)
- Van Dyke's Taxidermy Supply, Casting pages 1 and 2 (read November 22, 2026)
- Forum threads: HuntingNet, Fish: Mounts or Replicas?; HuntingNet, Plastic fish?; HuntingNet, Replica Fish Question; Rokslide, Replica skulls