AnimalsBy Taxidermy Hobbyist Editorial TeamUpdated November 22, 2026

Moose Mounts: Size, Wall Space, Cost and Shipping

How big is a moose mount, really?

A moose mount is a very big head to hang. Three moose shoulder mounts listed for resale measure between about 4.5 and 5.25 feet tall, 4 and 5 feet wide, and 3.5 and 5 feet deep off the wall. Depth, not width, is the number that catches people out, and the pose you pick sets it.

Those figures come from dealer listings that publish the measured size of each mount. A forward-facing shoulder mount listed on 1stDibs measures 55 inches tall, 49 inches wide and 45 inches deep. A Yukon moose shoulder mount measures 56 by 48 by 42 inches. A Canadian moose the dealer calls the biggest it has had measures 63 inches tall, about 59 inches wide and 61 inches deep. Your bull will be its own size, so treat these as a sense of scale for moose taxidermy, not a spec.

The animal itself explains why. The National Park Service says adult moose at Denali stand 5 to 6.5 feet at the shoulder, with males weighing 900 to 1,400 pounds and females 700 to 1,100. A life-size mount puts that whole animal, its antlers and a base in the room, so get the finished height, length and depth from the shop before you commit.

How much wall space does a moose shoulder mount need?

Going by those measured mounts, plan for a clear wall about 5 feet wide, a ceiling with room above a mount that can stand over 5 feet tall, and a room that can take 3.5 to 5 feet of antler and nose coming off the wall. Then check the doorway, because the mount has to get through it.

The most practical advice we found comes from a 2020 Hunt Talk thread on moose mounts. A member who said he'd been in the taxidermy business for two years wrote that a straight-on pose is the most space-economical, that turning the head right or left means hanging it further out from the wall, and that a sneak pose pushes the nose further into the room. In the same post he described a client who planned to hang a moose in his dining room and switched to a cap mount once he heard the measurements.

Later in that thread he added that width usually isn't the problem with moose mounts, the distance from the wall is. His advice: find out from your taxidermist how far the form will stick out into the room, and make sure that's less than your doorway width, especially if the door sits near a corner.

Short on room? The same member who warned about projection wrote that a moose European mount hung flat against the wall takes up surprisingly little space, even on big bulls. For how the main styles compare across species, see our guide to types of taxidermy mounts.

What does a moose mount cost?

Published moose shoulder mount prices on the studio price lists we checked in November 2026 run from $1,450 at Wapiti Taxidermy in Colorado to $3,500 at Knight's Taxidermy in Anchorage, and Whitetail Creations lists $3,500 as a minimum for moose. That spread is wide, so compare a few shops near you and ask what's included before you compare totals.

Studio (price list)Moose shoulder mountNotes on the same list
Wapiti Taxidermy (Livermore, CO)$1,450Open mouth add $250
Hooks & Tines Taxidermy$2,0002026 price list
Advantage Taxidermy (Davenport, WA)$2,200Pedestal $2,550
Eells Taxidermy$2,200 to $2,500Effective September 1, 2025
Upper Bay Taxidermy$2,250Pedestal $2,650; rates effective 10/1/25
Hunter's Choice Taxidermy (Nampa, ID)$2,500 Shiras; $2,800 AlaskanNo date on the list; turnaround estimate 12 to 14 months on all mounts
Owl Ridge Taxidermy (Laramie, WY)$2,750Plus $400 for Alaskan and Canadian moose; detachable antlers plus $450; prices updated July 10, 2026
All Taxidermy$3,000Open mouth $250 extra
Outback Taxidermy$3,175Effective July 1, 2026; closed mouth prices
Knight's Taxidermy (Anchorage, AK)$3,5002025 prices; detachable moose antlers $600
Whitetail Creations$3,500 (minimum)Listed as a minimum

All figures were read on each studio's own page in November 2026 and can change. Shipping is extra on some lists: Owl Ridge says "Shipping is NOT included," and Knight's prices crating per job. Two more lines show what can move a price. Owl Ridge prices an Alaskan or Canadian bull $400 above its base moose price, and Hunter's Choice lists an Alaskan moose $300 above a Shiras moose, so the kind of moose matters. Knight's lists moose antler paddle repair as quoted, with a $1,000 minimum, so damage in the field shows up on the bill. For how moose fits next to other species, our taxidermy cost overview covers the wider picture.

Which moose mount style fits your space and budget?

The main choices are a shoulder mount, a pedestal, a European or antler mount, and a life-size mount. Prices below are single studios' published figures, checked November 2026, not market ranges.

Moose shoulder mount (head mount)

  • Cost range: see the table above; the lowest list we read was $1,450 at Wapiti and the highest $3,500 at Knight's.
  • Timeline: shops set their own queue. Hunter's Choice Taxidermy in Nampa, Idaho currently estimates 12 to 14 months on all mounts, and All Taxidermy lists 9 to 15 months for most projects.
  • Space required: the measured resale mounts above stand 42 to 61 inches off the wall.
  • What it looks like: head, neck and upper chest on the wall, also called a head mount.
  • Best for: a great room, a lodge wall or a high-ceilinged space. One Hunt Talk member said "They are huge mounts and you need lots of wall space"; his hangs in a great room dormer.
  • What determines quality: a good cape and a pose chosen for your room. Ask to see moose the shop has finished, and ask for the form's projection.

Moose pedestal mount

  • Cost range: Upper Bay lists $2,650 and Advantage lists $2,550 for a moose pedestal; Owl Ridge adds $200 for wall pedestals.
  • Timeline: the same shop queues apply; Hunter's Choice's 12 to 14 month estimate covers all mounts. Ask when you book.
  • Space required: ask the shop for the finished height and depth; no pedestal measurements were published on the lists we read.
  • What it looks like: a shoulder mount on a vertical base. It isn't a full-body mount: the legs and body aren't there. Our pedestal mount guide compares pedestals with wall mounts.
  • Best for: a corner or a wall where you want more of the animal without going life-size.
  • What determines quality: the same cape and pose work as a shoulder mount, plus a base that suits the room.

Moose European mount and antler mounts

Life-size moose mount

What about a caribou mount?

Published caribou shoulder mount prices we read in November 2026 include $1,150 at Whitetail Creations. Other caribou shoulder prices were $1,300 at Upper Bay, Eells and Advantage, $1,500 at Hunter's Choice, $1,650 at Knight's, $1,800 at Hooks & Tines, $1,850 at All Taxidermy and $2,420 at Outback. Knight's prices a caribou antler panel mount at $650. The space questions are the same: measure the wall, ask for the projection, and check the door.

How do you get a moose home from Canada?

A moose you hunted in Canada comes into the United States as wildlife, so the U.S. Fish and Wildlife Service has to clear it. You file a declaration, bring the documents the export side requires, and check the USDA's rules before anything ships. Here's what the rules themselves say.

  • Declare it. Federal rules require a "Declaration for Importation or Exportation of Fish or Wildlife" (Form 3-177) when wildlife is imported (50 CFR 14.61), and the exception for personal baggage doesn't cover game trophies or raw, salted or crusted hides (50 CFR 14.62(b)(2)). The Service accepts the form online through eDecs.
  • Get it cleared before release. A Service officer must clear imported wildlife before Customs releases it, and you'll be asked for shipping documents and any permits the U.S. or the exporting country requires (50 CFR 14.52).
  • Port of entry. If you're a U.S. resident who lawfully took the moose in Canada and it's for your own use, it may come through any Customs port of entry, unless the species needs a permit under certain other parts of the rules (50 CFR 14.16(c)).
  • Check the Canadian side. The Fish and Wildlife Service's guidance for trophies from Africa notes that many countries require export permits even for species CITES doesn't protect, and that importing without a permit a foreign country requires violates U.S. law. Ask your outfitter or the provincial wildlife office what your province requires.
  • Agricultural rules. The same Fish and Wildlife Service guidance points hunters to the USDA's animal import information and warns that "some shipments may need to be consigned and shipped to a USDA approved establishment." Read the USDA's guidance for hunters, or ask APHIS, before you ship a cape, hide or skull.

Ask your outfitter before the trip how capes and antlers usually leave the camp, and line up your taxidermist early so the cape doesn't sit waiting. To compare how other big bulls are handled, see our page on elk taxidermy.

Frequently asked questions

How much does a moose shoulder mount cost?

On the eleven studio price lists we read in November 2026, a moose shoulder mount was listed from $1,450 at Wapiti Taxidermy to $3,500 at Knight's Taxidermy, with Whitetail Creations listing $3,500 as a minimum for moose. The full list is in the table above.

Will a moose mount fit through my door?

Ask your taxidermist how far the form projects from the wall. A Hunt Talk member in the taxidermy business said that projection, not width, is the usual problem, and that the projection has to be smaller than your doorway is wide. If it won't fit, ask about detachable antlers; Knight's lists them at $600 for moose and Owl Ridge at $450.

Is a moose European mount a good choice for a small room?

It can be. A Hunt Talk member said a moose European mount hung flat against the wall sticks out surprisingly little into the room. You still need the width for the antlers.

How long does a moose mount take?

It depends on the shop's queue. Hunter's Choice estimates 12 to 14 months on all mounts and All Taxidermy 9 to 15 months for most projects. Ask for a written estimate when you drop off.

Do I need a permit to bring a moose from Canada?

You need to declare it on Form 3-177 and have it cleared by the Fish and Wildlife Service (50 CFR 14.61 and 14.52), and you need whatever export documents the province requires. Check with the province and your outfitter before you hunt.

If you also have a bear on the wall list, our bear mount page covers the wall options. More species are collected on our animal mounts page.

Need a Professional?

Browse taxidermy studios, schools, suppliers and tanneries by state.

Find a Taxidermist Near You